Rocketfish RF-TVMLPT03 Manuel d'utilisateur télécharger pdf

M8 x 16mm M8 x 40mm M8 x 60mm

M8 bag

Tools you will need:

• Stud nder

• Awl

• Pencil

• Level

• Tape measure

Thank you for choosing the

Rocketsh RF-TVMLPT03.

The RF-TVMLPT03 TV mount

is designed to support

a TV weighing up to

130 lbs. (59 kg)

• Phillips screw driver

• Hammer (Concrete Only)

• ½ in. socket wrench

• 3/16 in. wood drill bit

• 3/8 in. masonry drill bit (Concrete Only)

• Power drill

QUICK SETUP GUIDE

RF-TVMLPT03

1 Attach the TV brackets

Option 1: Attaching to a at

mounting surface

Attach the left and right TV brackets

(B and C) to the back of the TV using:

The M4/M5 washers (F) and

the M4 x 12 mm (D)

or M5 x 12 mm (H) screws.

The M6/M8 washers (M) and

the M6 x 12 mm (J) screws

or M6 x 20 mm (K) screws

or the M8 x 16 mm (O) screws.

2 Install the wall plate

Option 1: Installing to a wood stud wall

Caution: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts.

Note: Any material covering the wall must not exceed 5/8 in. (16 mm).

a. Locate the studs. Verify the center of the stud with an awl or thin nail or use an

edge-to-edge stud nder.

b. Level the wall plate (A) and mark hole locations.

c. Drill pilot holes as illustrated.

d. Align the wall plate (A) with the pilot holes, then place the washers (T) over the holes.

Insert the lag bolts (U) through the washers, then tighten the lag bolts with a socket wrench

only until the washers are pulled rmly against the wall plate.

DO NOT over-tighten the lag bolts.

Package contents

A Wall plate (1)

B Left TV bracket (1)

C Right TV bracket (1)

M4 bag

D M4 x 12 mm screws (4)

E M4 x 30 mm screws (4)

F M4/M5 washers (8)

G M4/M5 spacers (4)

M5 bag

H M5 x 12 mm screws (4)

I M5 x 30 mm screws (4)

M6 bag

J M6 x 12 mm screws (4)

K M6 x 20 mm screws (4)

L M6 x 35 mm screws (4)

M M6/M8 washers (4)

N M6/M8 spacers (4)

M8 bag

O M8 x 16 mm screws (4)

P M8 x 40 mm screws (4)

Q M8 x 60 mm screws (4)

Hex key bag

R 3⁄16 in. Hex Key (1)

Lag bolt bag

S Concrete anchors (4)

T Lag bolt washers (4)

U 5⁄16 in. x 23⁄4 in. lag bolts (4)

M4 x 12mm

M5 x 12mm

M6 x 12mm

M4 x 30mm

M5 x 30mm

M6 x 20mm

in. x 2 in.

M6 x 35mm

M4 bag

Hex key bag

M5 bag

M6 bag

Lag bolt bag

Option 2: Attaching to a curved or

irregular mounting surface

Attach the left and right TV brackets (B and C) to the

back of the TV using:

The M4/M5 spacers (G), M4/M5 washers (F), and

the M4 x 30 mm screws (E) or M5 x 30 mm screws (I).

The M6/M8 spacers (N), M6/M8 washers (M),

and the M6 x 35 mm screws (L)

or the M8 x 40 mm (P) or M8 x 60 mm screws(Q).

Note: Use the M4 washers (F) between

the spacers and the bracket with the M4

or M5 screws only.

F M

16 - 24 in.

406mm - 610mm

< 16 mm

(

⁄8

in.)

75mm

3 in.

M4/M5

M6/M8

3/16 in.

1 2

Résumé du contenu

Page 1 - QUICK SETUP GUIDE

M8 x 16mm M8 x 40mm M8 x 60mmM8 bagAPQOTools you will need:• Stud nder• Awl• Pencil• Level• Tape measureThank you for choosing the Rocketsh RF-TVMLP

Page 2 - We’re here for you

6907-002015<00> 10-0363 Option 2: Installing to a solid concrete or concrete block wallCaution: Avoid potential injuries or property damage! DO

Commentaires sur ces manuels

Pas de commentaire

Rocketfish RF-TVMLPT03 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Meubles Rocketfish RF-TVMLPT03. RocketFish RF-TVMLPT03 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels